4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 129
(7) Disconnect 1 connector [3] and release the
harness from the harness guide.
Fig. 4-349
(8) Remove 1 screw.
Fig. 4-350
(9) Release the harness from the harness guide,
and then remove the harness cover [4].
Fig. 4-351
To Next Page
Loading...
