e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 190
(8) Open the finisher cover and remove 1 fixing
screw. Pull out the lever.
Fig. 4-519
(9) Take off the finisher with the hole punch unit.
Notes:
Be careful not to fell the finisher when
moving only the finisher unit.
Fig. 4-520
(10) Remove 2 screws and take off the connector
cover.
Fig. 4-521
To Next Page
Loading...
