Toshiba E-STUDIO4508A - Page 315

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 195
(12) Install the connector cover with 1 screw.
Fig. 4-534
(13) Take off the cover of the hole punch unit
lower side.
Fig. 4-535
(14) Remove 2 screws. Lift up the hole punch unit
and take it off.
Fig. 4-536