6
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6 - 3
(6) If the value B is not within the range of 234 to 246, press the Up or Down button to adjust the
value manually.
Notes:
The relation between the button and the values A and B is as follows.
(7) Press the [OK] button.
The drum, developer unit, etc. are stopped and the following is displayed.
Fig.6-5
(8) Turn the power OFF.
(9) Install the toner cartridge.
Button to be
pressed
Value A Value B
Up Increased Increased
Down Decreased Decreased
[OK]
100%
TEST MODE
A3
A
To Next Page
Loading...
