e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 54
(4) Loosen 2 screws.
Fig.6-39
(5) Move the entire guide to the front or rear
side. Be sure to move the entire guide until
you can see 4 triangles.
(6) Tighten the 2 screws of the adjustment plate.
(7) Install the drawer tray, drawer and stopper.
* Adjustable range: 3 mm to the front side,
4 mm to the rear side (Unit: 1 mm)
Fig.6-40
Screw
(A)
(B)
Scale
To Next Page
Loading...
