Toshiba e-Studio477s - Color Conversion Table Selection

To Next Page

To Previous Page

SETTING / ADJUSTMENT

4 - 22

4.4.15 Color conversion table selection

The color conversion table for each original mode at color scanning can be selected as follows.

Notes:

When "For reproduction of pure color" is selected, the colors other than pure colors of CMY

might change.

(1) While pressing [0] and [5] simultaneously, turn the power ON.

(2) Key in the codes to be adjusted and press the [START] button.

(3) Key in the adjustment value.

(To correct a value once keyed in, press the [CLEAR] button.)

(4) Press the [OK] or [INTERRUPT] button to store the value in memory.  The equipment goes

back to the ready state.

(5) Let the equipment restart and perform the scanning job.

(6) If the desired image has not been attained, repeat step (2) to (5).

Code Original mode Item to be adjusted Remarks

8305 Text/Photo Color conversion

table

0: Color conversion for text or photo

1: Color conversion for text/photo

2: For reproduction of pure color

* "For reproduction of pure color" increases

the color reproduction of the pure color patch

for CMY.

8308 Custom mode

Other manuals for Toshiba e-Studio477s