Toshiba e-Studio477s - Precautions and Procedures When Replacing the HDD

To Next Page

To Previous Page

REPLACEMENT OF PC BOARDS/HDD

6 - 13

6.2.3 Precautions and procedures when replacing the HDD

Notes:

• When the HDD is replaced, it is necessary to back up the data in the HDD before replacing and

to recover them after replacing.

• To maintain the security, ask users to perform the backup/restore for users’ data/information in

the HDD. The service technician can perform them only when users permit it.

• Some data in the HDD cannot be backed up and can be kept only on the paper.

• Do not replace the HDD and the SRAM board (for the SYS board) together.

• When the HDD is replaced, do not perform SRAM data formatting (Clear SRAM) before the

normal start-up.

• When the HDD is replaced, do not restore the back-up file before the normal start-up.

A procedure for replacing the HDD is shown below.

Fig.6-23

Start

[A] Back up data in HDD

[B] Print out "FUNCTION LIST FOR MAINTENANCE"

[C] Print out "FUNCTION" list

[D] Erase HDD

[E] Replace/Format HDD

[F] Reset user's setting item and restore data/information

[G] Reset "FUNCTION LIST FOR MAINTENANCE"

[H] Reset "FUNCTION" list

Setting completed

[I] Adjust image quality

Other manuals for Toshiba e-Studio477s