Toshiba e-Studio477s - 6 Replacement of Pc Boards;Hdd; Replacement of Pc Boards;Hdd; Removal and Installation of PC Boards;Hdd; Right Side Cover

To Next Page

To Previous Page

REPLACEMENT OF PC BOARDS/HDD

6 - 1

6. REPLACEMENT OF PC BOARDS/HDD

6.1 Removal and Installation of PC Boards/HDD

Refer to the Hardware Guide for the removal and installation procedures of the PC boards other than

the SYS board, HDD, and SRAM board <for SYS board>.

Notes:

When the PC board/HDD is replaced, refer to the respective Notes and Cautions of

“Replacement of PC boards and HDD” in  P. 6-9 "6.2 Precautions, Procedures and Settings

for Replacing PC Boards and HDD".

6.1.1 Right side cover

(1) Remove two screws.

Fig.6-3

(2) Remove the screw located at the bottom of

the right side cover.

Fig.6-4

Other manuals for Toshiba e-Studio477s