Toshiba e-Studio477s - Configuration of the Printer, Fax, and Scanner Functions; Scan To Mail; Scan To Network PC; Scan To Remote PC

To Next Page

To Previous Page

SELF-DIAGNOSTIC MODE

3 - 56

3.15.5 Operation procedure

1. Start up with the Setting Mode (08).

2. Install a USB storage device, in which setting files are stored in the root, in the MFP.

3. Key in [3673] and then press the [START] button.

4. Press [EXECUTION].

5. Setting for all codes included in the setting file are completed, the BASIC screen of the 08 mode

appears.

6. Remove the USB storage device.

Other manuals for Toshiba e-Studio477s