e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
5 - 68
[F131] Error due to damage to filtering setting file
[F140] ASIC format error
Classification Contents
Other service call The filtering function is not working properly due to the damage
to the file for the filtering setting.
Check item Measures
Setting 1. Check the bad sector of the HDD (08-9072). If the result is
"NG", replace the HDD.
Notes:
It may take more than 30 minutes to finish the checking.
2. Perform [3] + [C] + [POWER] [3], and then reinstall the
HDD software.
Notes:
User data will be deleted when [3] + [C] + [POWER]
[3] is performed.
Parts to be replaced Remarks
HDD
Classification Contents
Other service call ASIC formatting fails or memory acquiring fails when software
is formatted
Check item Measures
SYS board • Connector check
• Board check
Main memory • Check the installation
• Main memory check
Replace parts Remarks
Main memory
SYS board
To Next Page
Loading...
