e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
3 - 44
• Print count (number of output pages)
The number of output pages shown at the pixel counter is counted after converting all paper sizes to
the standard paper size (A4/LT). Printing on other than the standard size is converted by paper area
ratio. The standard paper size is set in the setting mode (08-6500).
The examples of conversion are as follows:
Ex.)
“1” is added to the print count when printing on A4/LT size.
“2” is added to the print count when printing on A3/LD size. (area ratio to A4/LT: 200%)
“1.49” is added to the print count when printing on B4 size. (area ratio to A4: 149%)
“1.27” is added to the print count when printing on LG size. (area ratio to LT: 127%)
• Pixel count (%)
Pixel count (%) shows the ratio of the emitting pixels of the LED printer heads to all pixels on
standard paper.
The examples of pixel count are as follows:
Notes:
In the following examples, ‘solid copy’ is considered to be 100%. But since the image has 4
margins, it never becomes 100% actually.
Ex.)
Printing 5 pages on A4/LT size with solid copy (LED printer heads emit to all pixels.)
Pixel count: 100%, Print count: 5
Printing 5 pages on A4/LT size with blank copy (LED printer heads never emit.)
Pixel count: 0%, Print count: 5
Printing 2 pages on A4/LT size with solid copy (LED printer heads emit to all pixels.)
Printing 2 pages on A4/LT size with blank copy (LED printer heads never emit.)
Pixel count: 50%, Print count: 4
Printing 3 pages on A4/LT size with 6% of LED printer heads emission
Printing 1 page on A4/LT size with 2% of LED printer heads emission
Pixel count: 5%, Print count: 4
Printing 2 pages on A3/LD size with solid copy (LED printer heads emit to all pixels.)
Pixel count: 100%, Print count: 4
Printing 2 pages on A3/LD size with 6% of LED printer heads emission
Pixel count: 6%, Print count: 4
• Average pixel count (%) and latest pixel count (%)
There are 2 types of the value calculated as the pixel count, average pixel count (%) and latest pixel
count (%).
Average pixel count (%)
The average value of all pixel count data after each reference data is cleared is calculated and
displayed.
Latest pixel count (%)
The value is displayed for printing just before the pixel counter is confirmed.
• Type of calculated data
Since this is multifunctional and color equipment, the data of pixel count is calculated for each
function and color.
To Next Page
Loading...
