Maintenance Utility Operating Manual 42678819FU02 - 18/38
(3) Uploading and saving the PU board setting value
Click [Upload and save the PU board setting value] in the "PU board replacement - Menu" screen to
upload and save the PU board setting value.
If a PU board setting value of the same ID string has been saved, the following check window is
displayed.
If the PU board setting value has not been stored or the [OK] button in the above confirmation window
is clicked, go to the window that "PU board replacement - Upload and Save", and uploading of the PU
board setting value starts.
(The upload operation may take several minutes. Do not perform any operations until the upload
operation is complete.)
U
loadin
. Wait
To Next Page
Loading...
