Toshiba e-Studio477s

To Next Page

To Previous Page

SELF-DIAGNOSTIC MODE

3 - 22

[B] 2. Remove Key

Select this to reuse the ADI-HDD as well as the equipment.

When this item is selected, all image data in the HDD are deleted.

This operation requires approx. 20 minutes since the partition must be rebuilt.

When "2" is selected and then [START] button is pressed, the menu below appears.

To start, press the [START] button.

Fig. 3-12

When the operation is finished, the result appears on the menu.

Fig. 3-13

Notes:

After this operation, the equipment becomes reusable without reinstalling the firmware.

HDD Assist Mode

Current HDD type: ADI HDD

Select number (1-2) and press START key

1. Revert factory initial status HDD

2. Remove key

System Firmware Version

Update Mode

: xxxx(x.x.x.x)

: 4c Mode

Confirmation Screen

Are you sure ???

Press START to continue

Press STOP to cancel