Toshiba e-Studio477s - Procedure for Disabling Data Encryption Function

To Next Page

To Previous Page

BACKUP FUNCTION

9 - 11

9.2.4 Procedure for disabling data encryption function

The basic procedure is the same as the one for enabling this function. To disable it, set “0 (Invalid)” in

the code 08-9379 at step  P. 9-9 "[D] Enable data encryption function".

9.2.5 Procedure for discarding HDD when data encryption function is

enabled

Set the data encryption function disabled following the procedure shown in  P. 9-11 "9.2.4 Procedure

for disabling data encryption function". Then perform the code 3C->6 : Erase HDD Securely (HDD

securely erasing) to completely erase the data in the HDD.

Other manuals for Toshiba e-Studio477s