Maintenance Utility Operating Manual 42678819FU02 - 21/38
(4) Downloading the PU board setting value
Click [Download the saved PU board setting value] on the "PU board replacement - Menu" screen to
download the PU board setting value.
It checks consistency of the saved PU board setting value that was selected in the ID string listing area,
and if the value is not consistent, the following error message window is displayed.
If the above error message window is displayed, the PU board setting value for the entered ID string
cannot be downloaded.
Click [OK] and, unless the matching error is due to counter value reset, the stored PU board setting
value is erased, the “PU board replacement - Menu” screen being restored.
If no error is found in the validation check, the download confirmation window shown below appears.
To Next Page
Loading...
