Toshiba e-Studio477s - Description of the Touch Panel Display

© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO477S/527S/477SL
DISASSEMBLY AND REPLACEMENT
2 - 3
2
2.1.3 MY-1046 (Paper feed pedestal)
2.1.4 GR-1170 (Caster)
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Remove 2 screws and take off 2 fixing
brackets.
Fig. 2-6
(5) Lift the equipment up and remove the paper
feed pedestal.
Fig. 2-7
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Release the lock.
Fig. 2-8