Toshiba e-Studio477s - About the Operator Panel

To Next Page

To Previous Page

DISASSEMBLY AND REPLACEMENT

2 - 5

2.1.6 MJ-1039 (Offline stapler)

(5) Lift the equipment up and remove the spacer.

Fig. 2-12

(1) Press the [Power] button on the control panel

to shut it down.

(2) Turn the main power switch of the equipment

off.

(3) Disconnect the power cable.

(4) Take off the right side cover.

 P. 6-1 "6.1.1 Right side cover"

(5) Take off the SYS board cover.

 P. 6-4 "6.1.2 SYS Board cover"

(6) Disconnect the connector.

Fig. 2-13

(7) Remove 2 screws and take off the offline

stapler.

Fig. 2-14

Other manuals for Toshiba e-Studio477s