Toshiba e-Studio477s - Open the Box and Remove the Additional Tray; Turn OFF the Power to the Machine

3
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO477S/527S/477SL
SELF-DIAGNOSTIC MODE
3 - 9
3.4 Output check (test mode 03)
<Operation procedure>
Procedure 1
Procedure 2
Procedure 3
Procedure 4
Procedure 5
* Return to the standby screen for code input by pressing the [CLEAR] button.
Refer to "11. SELF-DIAGNOSTIC MODE" in this manual for the codes available in the test mode 03.
Status of the output signals can be checked in the test mode 03.
[0][3]
[POWER]
[POWER] OFF/ON
(Exit)
[START]
(Code)
Operation
ON
Stop
code
Operation
OFF
[START]
[0][3]
[POWER]
[POWER] OFF/ON
(Exit)
[START] [CLEAR]
Operation
One direction
Test mode
standby
(Code)
[0][3]
[POWER]
[POWER]
OFF/ON
(Exit)
(Code)
[START] [START]
Operation
ON
Test mode
standby
[CLEAR]
Operation
OFF
[0][3]
[POWER]
[POWER] OFF
[START]
(Code)
[0][3]
[POWER]
[START] [Digital keys]
[START]
[POWER] OFF/ON
(Exit)
(Code)
[START]