Sets the condition and day of the week for
scheduled automatic reboot. The condition and day
of the week are assigned to each bit as follows.
Input the sum of each bit as setting value.
<Input value>
bit1: Monday 0: Disabled 1: Enabled
bit2: Tuesday 0: Disabled 2: Enabled
bit3: Wednesday 0: Disabled 4: Enabled
bit4: Thursday 0: Disabled 8: Enabled
bit5: Friday 0: Disabled 16: Enabled
bit6: Saturday 0: Disabled 32: Enabled
bit7: Sunday 0: Disabled 64: Enabled
bit8: Set the condition of reboot
0: Reboots only when in the sleep or super sleep
mode
128: Reboots regardless of the sleep mode
<Example>
- Reboots every day regardless of the sleep mode:
255
(1+2+4+8+16+32+64+128=255)
- Reboots on Sundays: 192
(0+0+0+0+0+0+64+128=192)
- Reboots every day only when in the sleep or
super sleep mode: 127
(1+2+4+8+16+32+64+0=127)
- Reboots on Sundays only when in the sleep or
super sleep mode: 64
(0+0+0+0+0+0+64+0=64)
Sets the card reader device. This code is available
only when two types of cards are used for the NFC
card reader.
0012ZZZZ or 0013ZZZZ
-ZZZZ: Sub code
0000: No authentication using a card
0001: IDm (FeliCa/NFC-FeliCa) and (or) UID
(Mifare/NFC-Mifare) are used
0002: Data (FeliCa/NFC-FeliCa/Mifare/NFC-
Mifare)
0003: SSFC mode
Sets the information to access the data stored in a
card. This code is available only when two types of
cards are used for the NFC card reader.
000ASSSS (hexadecimal, the first 3 digits are
fixed)
-A:
0: A key
1: B key
-SSSS:
To Next Page
Loading...
