1. Easy Setup Flow
40 Network Administration Guide — Setup Flow for Fax Features
•Memory
64MB for Windows 98
96MB for Windows Me and Windows NT 4.0
128MB for Windows 2000/XP/Server 2003
•OS
Windows 98 (Windows 98 Second Edition Recommended)
Windows Me
Windows NT 4.0 Service Pack 6a
Windows 2000 Service Pack 3
Windows XP Service Pack 1
Windows Server 2003
Setup Procedure
1. Setting up the DNS server and SMTP server.
When this equipment uses the SMTP server to send an Email, you must
configure the DNS server and SMTP server in your network.
P.78 "Tips of Setting up the DNS and Mail Servers for Internet Fax"
2. Setting up the TCP/IP and the HTTP Network Service to
enable TopAccess.
You should set the TCP/IP and HTTP Network Service from the Touch Panel
Display the first time you use it, to make TopAccess available.
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
3. Setting up the SMTP Client.
You should specify the SMTP server to be used for sending an Internet Fax.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the SMTP Client
4. Setting the Internet Fax Settings.
In the Internet Fax Settings, you should specify the from address and from name
to enable the Internet Fax transmission. Also you can specify the fragment size,
and body text that apply to the Internet Fax sent from this equipment.
z User Function Guide
4. SETTING ITEMS (ADMIN)
8. SETTING INTERNET FAX FUNCTIONS
Setting the Internet Fax Message Properties
Setting the Internet Fax Fragmentation
Setting the Internet Fax Body String Transmission
To Next Page
Loading...
Need help?
General
