1. Easy Setup Flow
Network Administration Guide — Setup Flow for Fax Features 41
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Internet Fax Settings
Setting up the Internet Fax Settings
5. Setting up the Fax Settings.
Set the Fax device settings to enable the facsimile transmission from this
equipment. This is available only when the optional Fax unit is installed.
z User Function Guide
4. SETTING ITEMS (ADMIN)
5. SETTING FAX FUNCTIONS
Setting the Terminal ID
Setting the Fax Initial Setup
Setting the RX Printing
Setting the Recovery Transmission
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Fax Settings
Setting up the Fax Settings
6. Setting up the N/W-Fax Destination and N/W-Fax Folder for
Save as file features.
To enable the Save as file feature on the N/W-Fax driver (to send the
document), configure the N/W-Fax Destination and N/W-Fax Folder to designate
where the document will be saved.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Save as file Settings
Setting up the N/W-Fax Destination
Setting up the N/W-Fax Folder
7. Advise users to install the N/W-Fax driver.
Users can install the N/W-Fax driver by installation from the Client Utilities CD-
ROM. For more information about the N/W-Fax driver installation, please see
the Network Fax Guide.
To Next Page
Loading...
Need help?
General
