Toshiba RemotEye 4 - Bacnet and Modbus Access; Additional Features; Figure 2-5 *** SNMP Access to Remoteye 4

RemotEye 4 User Manual – 90988-007 21
Figure 2-5 *** SNMP Access to RemotEye 4
2.6.3 BACnet and Modbus Access
The RemotEye 4 can be set to interface with these common industrial protocols:
 BACnet IP or BACnet MSTP (Internet Protocol or Master Slate Token Passing)
 Modbus TCP or Modbus RTU (Transmission Control Protocol or Remote Terminal Unit)
2.6.4 Additional Features
 Multiple RemotEye 4 Configuration Options – The RemotEye 4 can be configured either via the internet
(HTTP), SNMP, Telnet, SSHv2, or console port.
 Configuration Capture Tool – If multiple RemotEye 4’s are in a network, the operator can create one config
file and configure all RemotEye 4’s at once. It also allows troubleshooting to be expedited.
 UPS Home Group – RemotEye 4 can see other RemotEye 4s that are in the same network, as well as view
the UPS mode (on-line, Bypass, or Backup) of the corresponding attached UPS.
 A super user or Administrator can reset the password of users.
 The web page automatically logs out user after 15 minutes of inactivity
 Reminders – Reminders can be set to pop-up as alerts in the Alert Center Widget, and/or be sent as emails.
These are useful for setting reminders for such things as UPS filter changes, scheduled preventive
maintenance, etc.
 Firewall Settings – The RemotEye 4 can limit IP Address access.
 User Profiles – Allows adding up to eight new users to let everyone have their own personalized
Dashboard.
4