Toshiba RemotEye 4 - Appendix J - - Bacnet Point Mapping for G9000;G2020 V2; Bacnet Analog Input Point Mapping for G9000;G2020 V2

216 RemotEye 4 User Manual – 90988-007
APPENDIX J – – BACNET POINT MAPPING FOR G9000/G2020 V2
J.1 BACNET ANALOG INPUT POINT MAPPING FOR G9000/G2020 V2
ALL – BACnet Object: Binary Input BACnet Property: Present Value Out of Service: FALSE
Access: Read Only Status Flags: Normal
G9000/G2020 BACnet Analog Point Mapping
Instance
ID
Object Name & Description
Units
Comments
RMTI
-4 System
Information
1
RemotEye 4 Software Version
Firmware
From "RemotEye 4 Software Version" of "RemotEye 4 Configuration" page
2
RemotEye 4 Slave ID Number
ID
3
IP Address
IP Address
From "RemotEye 4 IP Address" of "RemotEye 4 Configuration" page
4
Subnet Mask
Subnet Mask
From "RemotEye 4 Subnet Mask" of "RemotEye 4 Configuration" page
5
Gateway IP Address
IP Address
From "RemotEye 4 Gateway Address" of "RemotEye 4 Configuration" page
6
RemotEye 4 Installation Date
Date
From "RemotEye 4 Installation Date" of "RemotEye 4 Configuration" page
7
Date on RemotEye 4
Date
From "Date On RemotEye 4" of "Date and Time" page
8
Time on RemotEye 4
Time
From "Time On RemotEye 4" of "Date and Time" page
UPS System
Information
9
UPS Manufacturer
Characters
Default
10
UPS Typeform
Characters
11
UPS ID Number
ID
12
UPS Capacity
kVA
13
UPS Firmware Version
Characters
Input Parameters
14
Input Numbers of Phases
Phases
15
Input Voltage Phase AB (L-L)
Volts
RATED IN VOLT = GET FROM TYPEFORM CMD M01
16
Input Voltage Phase BC (L-L)
Volts
RATED IN VOLT = GET FROM TYPEFORM CMD M01
17
Input Voltage Phase CA (L-L)
Volts
RATED IN VOLT = GET FROM TYPEFORM CMD M01
18
Input Voltage Percent Phase AB
%
19
Input Voltage Percent Phase BC
%
20
Input Voltage Percent Phase CA
%
21
Input Rated Voltage (L-L)
Volts
22
Input Current Phase A
0.1 Amps
VA -> M01
23
Input Current Phase B
0.1 Amps
VA -> M01
24
Input Current Phase C
0.1 Amps
VA -> M01
25
Input Frequency
0.1 Hz
26
Input Rated Frequency
0.1Hz