Toshiba RemotEye 4 - System Settings Change Records Page (T1000 & 1600 Xp;Xpi Only); Ups Events Records Page; Remoteye 4 Events Records Page; Table 10-4 Remoteye 4 UPS Warning Codes

RemotEye 4 User Manual – 90988-007 89
DCANERR
Display CAN communication error
SYSTSTFAIL
System test fail
VIOV
Input over voltage occurred
VIUV
Input under voltage occurred
FIERR
Input frequency error occurred
VBYPOV
Bypass overvoltage occurred
VBYPUV
Bypass undervoltage occurred
FBYPERR
Bypass frequency error occurred
DCUVBST
DC bus uvdervoltage at battery test
VBATLOW
Battery voltage low
VBATSD
Battery voltage has reached shutdown level
BATRPL
Battery replace event occurred
CHRGOV
Charger overvoltege occurred
BTSTFAIL
Battery test failed
BATDEPL
Battery depleted
BATOH
Battery overheat occurred
SYSOH
System overheat occurred
OL110
Overload occurred
Table 10-3 RemotEye 4 UPS Warning Codes
SYSTEM SETTINGS CHANGE RECORDS PAGE (T1000 & 1600XP/XPI ONLY)
This table lists the detail history of system changes that has occurred on the UPS. The Log can store a maximum of
680 records. If more events are recorded, the new record replaces the oldest record.
 Log Date – This field shows the date of the recording.
 Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss 24-
hour format (i.e., 8:30 p.m. is 20:30:00).
 Record Number - Maximum number of records is 255.
 System Input Type
 System Output Type
 Input Voltage (%)
 Output Voltage (%)
 Output Load (%)
 DC Input Voltage (%)
 Battery Voltage (%)
 Block
 Item
 Written
 Trigger Source
UPS EVENTS RECORDS PAGE
 Records the UPS Event Date, Time, and Description.
REMOTEYE 4 EVENTS RECORDS PAGE
Records the RemotEye 4 Event Date, Time, and Description.