4.18 Thermal Module 4 Replacement Procedures
Satellite A660/A665/A660D Maintenance Manual 4-45
Installing the Thermal Module
Install the thermal module according to the following procedures and Figures 4.35 and 4.36.
1. Reapply Shinetsu 7762 thermal grease on the VGA thermal pads as shown in Figure 4.35.
If you use a new thermal module, remove the release papers on the thermal pads first.
Figure 4.35 Reapplying Shinetsu 7762 grease on the thermal module
and remove any release papers