2Troubleshooting Procedures
Satellite A660/A665 Series Maintenance Manual
2.23 Sleep & Charge Troubleshooting
START
Preform Sleep &
Charge test
(Procedure 1)
Was a Sleep & Charge
problem detect?
Sleep & Charge is not
faulty. Continue
troubleshooting-refer to
Figure 2-1
Replace system
board
Perform connector
and replacement
check
(Procedure 2)
END
Figure 2-22 Sleep & Charge troubleshooting process
The system board may be the reason of a Sleep & Charge fault. The system board may be
damaged. To determine if the computer’s Sleep & charge is functioning properly, perform the