OPERATOR’S MANUAL
series Robot Controller
7.4 Speed Override [OVRD]
(1) Function
Sets the speed override for automatic operation. This function is useful to
effect an additional override, taking the programmed speed as 100%.
(2) Procedures
(a) Step 1: Command selection.
Press the NEXT key repeatedly until [OVRD] is displayed in the menu.
Press the corresponding function key then.
M O D E : I N T E R N A L / C O N T T E S T P R O
L :
O : 1 00%
M : F REE
S : S TOP
R E SET
S E L M O D E O V R D R E S E T >
(b) Step 2: Input of speed override.
Set an override of 1 ~ 100 on the speed by means of the appropriate function
key.
M O D E : I N T E R N A L / C O N T T E S T P R O
L :
O : 1 00%
M : F REE
S : S TOP
R E SET
O V E R R I D E [ 1 – 1 0 0 ] : 9 0
1 0 2 5 5 0 7 5 1 0 0
STE 80720
– 7-8 –
To Next Page
Loading...
