OPERATOR’S MANUAL
series Robot Controller
STOP CONT : A program is stopped in the continue mode.
It is restarted from the current program step.
[7] Bottom line: Function key menu display field
[WATCH] : Variable monitor
[STOP] : Stop
[BREAK] : Interruption
[LDISP] : Display of line to be executed
(3) Cautions
• For the functions and use of the external control signals, see the Interface
Manual.
• For the data communication function with the host computer, see the
Communication Manual.
• In the external automatic mode, only the MODE select switch, STOP switch,
SERVO ON switch, SERVO OFF switch and EMERGENCY stop pushbutton
switch provided on the control panel are operative.
• The mode can be changed through "USER. PAR".
• "EX. 232C" and "EX. ETHER" are controlled by the host computer. Enter
[U00] to change over to either mode. For details, see the User Parameter
Manual.
(EX. ETHER function is provided as standard in TS3000 and as an option in
TSL3000.)
STE 80720
– 8-4 –
To Next Page
Loading...
