Configure switch C
Uvgr" Qrgtcvkqp" Fguetkrvkqp"
1 Create Private
VLANs.
Required. On the XNCP→Rtkxcvg" XNCP→RXNCP" Eqphki" page,
Enter the Primary VLAN 6 and Secondary VLAN 2-3, and then click
the Etgcvg button.
2 Add
Promiscuous
port to Private
VLANs
Required. On the XNCP→Rtkxcvg" XNCP→Rqtv" Eqphki page,
configure the port type of Port8 as Rtqokuewqwu, enter Primary
VLAN 6 and Secondary VLAN 2-3, and click the Cff"button.
3 Add Host port to
Private VLANs
Required. On the XNCP→Rtkxcvg" XNCP→Rqtv" Eqphki page,
configure the port type of Port9 as Jquv, enter Primary VLAN 6 and
Secondary VLAN 2, and click the Cff"button. Configure the port type
of Port10 and Port11 as Jquv, enter Primary VLAN 6 and Secondary
VLAN 2-3, and click the Cff"button
4 Configure Port8 Required. On the XNCP→:2403S"XNCP→XNCP"Eqphki"page, click
the Gfkv button and then configure the Gitguu"Twng of Port8 as Vci.
Return to CONTENTS
90
To Next Page
Loading...
