X
ctkcdng"Tgswguv<"
Displays whether the remote client supports variable request.
RFW"Tgxkukqp<"
Displays the TLV revision of the OAMPDU.
Xgpfqt"Kphqtocvkqp<"
Displays the vender information of the remote client.
:04" Nkpm"Oqpkvqtkpi"
On this page, you can configure the parameters about OAM link events, including the threshold
and the detection period. Also, you can choose whether to notify the link event.
Choose the menu" Gvjgtpgv" QCO→Nkpm" Oqpkvqtkpi→Nkpm" Oqpkvqtkpi" to load the following
page."
Figure 8-6 Link Monitoring
The following entries are displayed on this screen:
" Nkpm"Oqpkvqtkpi"Eqphki"
Nkpm"Gxgpv<"
Select one type of the link events to configure. Link events
include Symbol Period Error, Frame Error, Frame Period Error,
and Frame Seconds Error. For more details about link events,
please refer to QCO"Nkpm"Gxgpvu
.
Rqtv"Ugngev<"
Click the Ugngev" button to quick-select the corresponding port
based on the port number you entered.
Ugngev<"
Select the desired port for configuration. It is multi-optional.
11
7
To Next Page
Loading...
