370304" Rqtv"Eqphki"
On this page you can configure all ports' LLDP parameters.
Choose the menu"NNFR→Dcuke"Eqphki→Rqtv"Eqphki to load the following page."
Figure 15-2 Port Configuration
The following entries are displayed on this screen:
" NNFR"Rqtv"Eqphki"
Rqtv"Ugngev<"
Select the desired port to configure.
Cfokp"Uvcvwu<"
Select the port’s LLDP operating mode:
Vz(Tz<"Send and receive LLDP frames.
TzaQpn{< Only receive LLDP frames.
VzaQpn{< Only send LLDP frames.
Fkucdng< Neither send nor receive LLDP frames.
Pqvkhkecvkqp"Oqfg<"
Enable/Disable the ports' SNMP notification. If enabled, the local
device will notify the trap event to SNMP server.
Kpenwfgf"VNXu<"
Select TLVs to be included in outgoing LLDPDU.
Fgvcknu<"
Click Details to display the included TLVs.
3704"Fgxkeg"Kphq"
You can view the LLDP information of the local device and its neighbors on the"Nqecn"Kphq and
Pgkijdqt"Kphq"pages respectively.
370403" Nqecn"Kphq"
On this page you can see all ports' configuration and system information.
257
To Next Page
Loading...
