Figure 8-4 Basic Config
The following entries are displayed on this screen:
" Dcuke"Eqphki"
Rqtv"Ugngev<"
Click the Ugngev" button to quick-select the corresponding port
based on the port number you entered.
Ugngev<"
Select the desired port for configuration. It is multi-optional.
Oqfg<"
Select the OAM mode for the desired port.
Uvcvg<"
Select Enable/Disable the Ethernet OAM function for the desired
port.
Pqvg<"
You cannot establish an OAM connection between two OAM entities that work in the passive
mode.
11
4
To Next Page
Loading...
