" Itqwr"Vcdng"
Ugngev<"
Select the desired entry to delete the corresponding group.
It's
multi-optional.
Itqwr"Pcog<"
Displays the Group Name here.
Ugewtkv{"Oqfgn<"
Displays the Security Model of the group.
Ugewtkv{"Ngxgn<"
Displays the Security Level of the group.
Tgcf"Xkgy<"
Displays the Read View name in the entry.
Ytkvg"Xkgy<"
Displays the Write View name in the entry.
Pqvkh{"Xkgy<"
Displays the Notify View name in the entry.
Qrgtcvkqp<"
Click the Gfkv button to modify the Views in the entry and click the
Oqfkh{ button to apply.
Pqvg<"
Every Group should contain a Read View. The default Read View is viewDefault.
360306" UPOR"Wugt"
The User in an SNMP Group can manage the switch via the management station software. The
User and its Group have the same security level and access right. You can configure the SNMP
User on this page.
Choose the menu UPOR→UPOR"Eqphki→UPOR"Wugt to load the following page.
Figure 14-6 SNMP User
The following entries are displayed on this screen:
" Wugt"Eqphki"
Wugt"Pcog<"
Enter the User Name here.
239
To Next Page
Loading...
