Figure 7-7 Region Config
The following entries are displayed on this screen:
" Tgikqp"Eqphki"
Tgikqp"Pcog<"
Create a name for MST region identification using up to 32 characters.
Tgxkukqp<"
Enter the revision from 0 to 65535 for MST region identification.
90504"Kpuvcpeg"Eqphki"
Instance Configuration, a property of MST region, is used to describe the VLAN to Instance
mapping configuration. You can assign VLAN to different instances appropriate to your needs.
Every instance is a VLAN group independent of other instances and CIST.
Choose the menu Urcppkpi" Vtgg→OUVR" Kpuvcpeg→Kpuvcpeg" Eqphki" to load the following
page.
Figure 7-8 Instance Config
The following entries are displayed on this screen:
" Kpuvcpeg"Vcdng"
Kpuvcpeg"KF"Ugngev<"
Click the Ugngev button to quick-select the corresponding Instance ID
based on the ID number you entered.
100
To Next Page
Loading...
