360307" UPOR"Eqoowpkv{"
SNMP v1 and SNMP v2c adopt community name authentication. The community name can limit
access to the SNMP agent from SNMP network management station, functioning as a password. If
SNMP v1 or SNMP v2c is employed, you can directly configure the SNMP Community on this
page without configuring SNMP Group and User.
Choose the menu UPOR→UPOR"Eqphki→UPOR"Eqoowpkv{ to load the following page.
Figure 14-7 SNMP Community
The following entries are displayed on this screen:
" Eqoowpkv{"Eqphki"
Eqoowpkv{"Pcog<"
Enter the Community Name here.
Ceeguu<"
Defines the access rights of the community.
tgcf/qpn{< Management right of the Community is
restricted to read-only, and changes cannot be made to
the corresponding View.
tgcf/ytkvg< Management right of the Community is
read-write and changes can be made to the corresponding
View.
OKD"Xkgy<"
Select the MIB View for the community to access.
" Eqoowpkv{"Vcdng"
Ugngev<"
Select the desired entry to delete the corresponding Community. It
is multi-optional.
Eqoowpkv{"Pcog<"
Displays the Community Name here.
Ceeguu<"
Displays the right of the Community to access the View.
OKD"Xkgy<"
Displays the Views which the Community can access.
Qrgtcvkqp<"
Click the Gfkv"button to modify the MIB View and the Access right
of the Community, and then click the Oqfkh{ button to apply.
Pqvg<" "
The default MIB View of SNMP Community is viewDefault.
241
To Next Page
Loading...
