380305" PFR"Eqphki"
On this page you can configure the NDP function for the switch.
Choose the menu Enwuvgt→PFR→PFR"Eqphki"to load the following page.
Figure 16-4 NDP Config
The following entries are displayed on this screen:
" Inqdcn"Eqphki"
PFR<"
Enable/Disable NDP function globally.
Cikpi"Vkog<"
Enter the period for the neighbor switch to keep the NDP packets
from this switch.
Jgnnq"Vkog<"
Enter the interval to send NDP packets.
" Rqtv"Eqphki"
Ugngev<"
Select the desired port to configure its NDP status.
Rqtv<"
Displays the port number of the switch.
PFR<"
Displays NDP status of the current port.
Gpcdng<"
Click the Gpcdng button to enable NDP for the port you select.
Fkucdng<"
Click the Fkucdng button to disable NDP for the port you select.
266
To Next Page
Loading...
