SNMP
module is used to configure the SNMP function of the switch, including three submenus:
UPOR"Eqphki, Pqvkhkecvkqp and TOQP.
3603"UPOR"Eqphki"
The UPOR" Eqphki" can be implemented on the Inqdcn" Eqphki, UPOR" Xkgy, UPOR" Itqwr,
UPOR"Wugt and UPOR"Eqoowpkv{ pages.
360303" Inqdcn"Eqphki"
To enable SNMP function, please configure the SNMP function globally on this page.
Choose the menu UPOR→UPOR"Eqphki→Inqdcn"Eqphki to load the following page.
Figure 14-3 Global Config
The following entries are displayed on this screen:
" Inqdcn"Eqphki"
UPOR<"
Enable/Disable the SNMP function.
" Nqecn"Gpikpg"
Nqecn"Gpikpg"KF<"
Specify the switch’s Engine ID for the remote clients. The
Engine ID is a unique alphanumeric string used to identify the
SNMP engine on the switch.
" Tgoqvg"Gpikpg"
Tgoqvg"Gpikpg"KF<"
Specify the Remote Engine ID for switch. The Engine ID is a
unique alphanumeric string used to identify the SNMP engine
on the remote device which receives informs from switch.
Pqvg<"
The amount of Engine ID characters must be even.
236
To Next Page
Loading...
