360503" Jkuvqt{"Eqpvtqn"
On this page, you can configure the History Group for RMON.
Choose the menu UPOR→TOQP→Jkuvqt{"Eqpvtqn to load the following page.
Figure 14-10 History Control
The following entries are displayed on this screen:
" Jkuvqt{"Eqpvtqn"Vcdng"
Ugngev<"
Select the desired entry for configuration.
Kpfgz<"
Displays the index number of the entry.
Rqtv<"
Specify the port from which the history samples were taken.
Kpvgtxcn<"
Specify the
interval to take samplings from the port.
Qypgt<"
Enter the name of the device or user that defined the entry.
Uvcvwu<"
Enable/Disable the corresponding sampling entry.
248
To Next Page
Loading...
