340305" Jqnkfc{"Eqphki"
Holiday mode is applied as a different secured access control policy from the week mode. On this
page you can define holidays according to your work arrangement.
Choose the menu CEN→Vkog/Tcpig→Jqnkfc{"Eqphki to load the following page.
Figure 12-3 Holiday Configuration
The following entries are displayed on this screen:
" Etgcvg"Jqnkfc{"
Uvctv"Fcvg<"
Specify the start date of the holiday.
Gpf"Fcvg<"
Specify the end date of the holiday.
Jqnkfc{"Pcog<"
Enter the name of the holiday.
" Jqnkfc{"Vcdng"
Ugngev<"
Select the desired entry to delete the corresponding holiday.
Kpfgz<"
Displays the index of the holiday.
Jqnkfc{"Pcog<"
Displays the name of the holiday.
Uvctv"Fcvg<"
Displays the start date of the holiday.
Gpf"Fcvg<"
Displays the end date of the holiday.
3404"CEN"Eqphki"
An ACL may contain a number of rules, and each rule specifies a different package range. Packets
are matched in match order. Once a rule is matched, the switch processes the matched packets
taking the operation specified in the rule without considering the other rules, which can enhance
the performance of the switch.
Packets are classified based on match rules in order of the rules. Once a rule is matched,
The ACL Config function can be implemented on CEN" Uwooct{, CEN" Etgcvg,"OCE"CEN,"
Uvcpfctf/KR"CEN"and"Gzvgpf/KR"C EN pages.
340403" CEN"Uwooct{"
On this page, you can view the current ACLs configured in the switch.
183
To Next Page
Loading...
