60304"Fgxkeg"Fguetkrvkqp"
On this page you can configure the description of the switch, including device name, device location
and system contact.
Choose the menu"U{uvgo→U{uvgo"Kphq→Fgxkeg"Fguetkrvkqp"to load the following page."
Figure 4-4 Device Description
The following entries are displayed on this screen:
" Fgxkeg"Fguetkrvkqp"
Fgxkeg"Pcog<"
Enter the name of the switch.
Fgxkeg"Nqecvkqp<"
Enter the location of the switch.
U{uvgo"Eqpvcev<"
Enter your contact information.
60305"U{uvgo"Vkog"
System Time is the time displayed while the switch is running. On this page you can configure the
system time and the settings here will be used for other time-based functions like"ACL.
You can manually set the system time, get UTC automatically if it has connected to an NTP server
or synchronize with PC’s clock as the system time.
Choose the menu U{uvgo→U{uvgo"Kphq→U{uvgo"Vkog to load the following page.
Figure 4-5 System Time
13
To Next Page
Loading...
