The followin
g entries are displayed on this screen:
" Vkog"Kphq"
Ewttgpv"U{uvgo"Fcvg<"
Displays the current date and time of the switch.
Ewttgpv"Vkog"Uqwteg<"
Displays the current time source of the switch.
" Vkog"Eqphki"
Ocpwcn<"
When this option is selected, you can set the date and time
manually.
Igv" Vkog" htqo" PVR"
Ugtxgt<"
When this option is selected, you can configure the time zone
and the IP Address for the NTP Server. The switch will get UTC
automatically if it has connected to an NTP Server.
Vkog"\qpg< Select your local time.
Rtkoct{1Ugeqpfct{"PVR"Ugtxgt< Enter the IP Address for
the NTP Server.
Wrfcvg" Tcvg<" Specify the rate fetching time from NTP
server.
U{pejtqpk|g"ykvj"
RE‚U"Enqem<"
When this option is selected, the administrator PC’s clock is
utilized.
Pqvg<"
1. The system time will be restored to the default when the switch is restarted and you need to
reconfigure the system time of the switch.
2. When Get Time from NTP Server is selected and no time server is configured, the switch will
get time from the time server of the Internet if it has connected to the Internet.
60306"Fc{nkijv"Ucxkpi"Vkog"
Here you can configure the Daylight Saving Time of the switch.
Choose the menu U{uvgo→U{uvgo"Kphq→Fc{nkijv"Ucxkpi"Vkog to load the following page.
Figure 4-6 Daylight Saving Time
14
To Next Page
Loading...
