380504" Enwuvgt"Eqphki"
On this page you can configure the status of the cluster the switch belongs to.
Choose the menu Enwuvgt→Enwuvgt→Enwuvgt"Eqphki"to load the following page.
For a candidate switch, the following page is displayed.
Figure 16-13 Cluster Configuration for Candidate Switch
The following entries are displayed on this screen:
" Ewttgpv"Tqng"
Tqng<"
Displays the role the current switch plays in the cluster.
" Tqng"Ejcpig"
Kpfkxkfwcn<"
Select this option to change the role of the switch to be individual
switch.
Eqoocpfgt<"
Select this option to change the role of the switch to be
commander switch, and then configure the cluster:
Cluster Name: Configure the name of the current cluster the
switch belongs to.
IP Pool & Mask: Configure the private IP range of the member
switches in the cluster.
274
To Next Page
Loading...
