Pqvg<"
Don’t transmit voice stream together with other business packets in the voice VLAN except for
some special requirements."
The Voice VLAN function can be implemented on Inqdcn"Eqphki."Rqtv"Eqphki"and QWK"Eqphki"
pages.
330503" Inqdcn"Eqphki"
On this page, you can configure the global parameters of the voice VLAN, including VLAN ID,
aging time, the transmission priority of the voice packets and so on.
Choose the menu SqU→Xqkeg"XNCP→Inqdcn"Eqphki"to load the following page.
Figure 11-12 Global Configuration
The following entries are displayed on this screen:
" Inqdcn"Eqphki"
Xq keg"XNCP<"
Enable/Disable Voice VLAN function.
XNCP"KF<"
Enter the VLAN ID of the voice VLAN.
Cikpi"Vkog<"
Specifies the living time of the member port in auto mode after the
OUI address is aging out.
Rtkqtkv{<"
Select the priority of the port when sending voice data.
330504" Rqtv"Eqphki"
Before the voice VLAN function is enabled, the parameters of the ports in the voice VLAN should
be configured on this page.
Choose the menu"SqU→Xqkeg"XNCP→Rqtv"Eqphki"to load the following page."
177
To Next Page
Loading...
