Figure 12-11 Action Create
The following entries are displayed on this screen:
" Etgcvg"Cevkqp"
Ugngev"Rqnke{<"
Select the name of the policy.
Ugngev"CEN<"
Select the ACL for configuration in the policy.
U/Okttqt<"
Select S-Mirror to mirror the data packets in the policy to the specific
port.
U/Eqpfkvkqp<"
Select S-Condition to limit the transmission rate of the data packets in
the policy.
Tcvg<"Specify the forwarding rate of the data packets those match
the corresponding ACL.
Qwv"qh"Dcpf<"Specify the disposal way of the data packets those
are transmitted beyond the rate.
Tgfktgev<"
Select Redirect to change the forwarding direction of the data packets
in the policy.
Fguvkpcvkqp" Rqtv<" Forward the data packets those match the
corresponding ACL to the specific port.
XNCP" KF<" Forward the data packets those match the
corresponding ACL in the corresponding VLAN.
SqU"Tgoctm<"
Select QoS Remark to forward the data packets based on the QoS
settings.
FUER<"Specify the DSCP region for the data packets those match
the corresponding ACL.
Nqecn"Rtkqtkv{<"Specify the local priority for the data packets those
match the corresponding ACL.
191
To Next Page
Loading...
