360504" Gxgpv"Eqphki"
On this page, you can configure the RMON events.
Choose the menu UPOR→TOQP→Gxgpv"Eqphki to load the following page.
Figure 14-11 Event Config
The following entries are displayed on this screen:
" Gxgpv"Vcdng"
Ugngev<"
Select the desired entry for configuration.
Kpfgz<"
Displays the index number of the entry.
Wugt<"
Enter the name of the User or the community to which the
event belongs.
Fguetkrvkqp<"
Give a description to the event for identification.
V{rg<"
Select the event type, which determines the act way of the
network device in response to an event.
Pqpg<"No processing.
Nqi< Logging the event.
Pqvkh{<" Sending trap messages to the management
station.
Nqi(Pqvkh{<" Logging the event and sending trap
messages to the management station.
Qypgt<"
Enter the name of the device or user that defined the entry.
Uvcvwu<"
Enable/Disable the corresponding event entry.
249
To Next Page
Loading...
