supplicant during the Qui
et Period.
Tgvt{"Vkogu<"
Specify the maximum transfer times of the repeated
authentication request.
Uwrrnkecpv"Vkogqwv<"
Specify the maximum time for the switch to wait for the
response from supplicant before resending a request to
the supplicant.
350804" Rqtv"Eqphki"
On this page, you can configure the 802.1X features for the ports basing on the actual network.
Choose the menu Pgvyqtm"Ugewtkv{→:2403Z→Rqtv"Eqphki to load the following page.
Figure 13-24 Port Config
The following entries are displayed on this screen:
" Rqtv"Eqphki"
Rqtv"Ugngev<"
Click the Ugngev" button to quick-select the corresponding port
based on the port number you entered.
Ugngev<"
Select your desired port for configuration. It is multi-optional.
Rqtv<"
Displays the port number.
Uvcvwu<"
Enable/Disable the 802.1X authentication feature for the port.
Iwguv"XNCP<"
Enable/Disable the Guest VLAN feature for the port.
Eqpvtqn"Oqfg<"
Specify the Control Mode for the port.
Cwvq< In this mode, the port will normally work only after
passing the 802.1X Authentication.
Hqteg/Cwvjqtk|gf< In this mode, the port can work normally
without passing the 802.1X Authentication.
Hqteg/Wpcwvjqtk|gf< In this mode, the port is forbidden
working for its fixed unauthorized status.
222
To Next Page