ctkcdng" Tgswguv"
QCORFWu<"
Displays the number of variable request OAMPDUs that have
been transmitted or received on the port.
Xctkcdng" Tgurqpug"
QCORFWu<"
Displays the number of variable response OAMPDUs that have
been transmitted or received on the port.
Nqqrdcem" Eqpvtqn"
QCORFWu<"
Displays the number of loopback control OAMPDUs that have
been transmitted or received on the port.
Qticpk|cvkqp"
Urgekhke"QCORFWu<"
Displays the number of organization specific OAMPDUs that
have been transmitted or received on the port.
Wpuwrrqtvgf"
QCORFWu<"
Displays the number of unsupported OAMPDUs that have been
transmitted or received on the port.
Htcogu"Nquv"Fwg"Vq"
QCO<"
Displays the number of frames that would otherwise be
transmitted by the OAM sublayer, but did not due to an internal
OAM sublayer transmit error.
:0704"Gxgpv"Nqi"
On this page, you can view the detailed Ethernet OAM event log information of a specific port. The
device will recount the numbers every time you click the"engct"button or the device is rebooted.
Choose the menu"Gvjgtpgv"QCO→Uvcvkuvkeu→Gxgpv"Nqi"to load the following page."
Figure 8-10 Event Log
The following entries are displayed on this screen:
" Gxgpv"Nqi"Uvcvkuvkeu"
Rqtv"Ugngev<"
Click the Ugngev" button to quick-select the corresponding port
based on the port number you entered.
Nqecn<"
Displays the number of link events that have occurred on the
local link.
Tgoqvg<"
Displays the number of link events that have occurred on the
remote link.
Gttqt"U{odqn"Gxgpv<"
Displays the number of error symbol period link events that have
occurred on the local link or remote link.
121
To Next Page
Loading...
