" Tqng"Ejcpig"
Kpfkxkfwcn<"
Select this option to change the role of the switch to be individual
switch.
For an individual switch, the following page is displayed.
Figure 16-16 Cluster Configuration for Individual Switch
The following entries are displayed on this screen:
" Ewttgpv"Tqng"
Tqng<"
Displays the role the current switch plays in the cluster.
" Tqng"Ejcpig"
Ecpfkfcvg<"
Select this option to change the role of the switch to be candidate
switch.
380505" Ogodgt"Eqphki"
When this switch is the commander switch of the cluster, via the commander switch you can
manually add a candidate switch to the cluster as well as remove the designated member switch
from the cluster. On this page you can configure and manage the member switch.
Choose the menu Enwuvgt→Enwugt→Ogodgt"Eqphki"to load the following page.
Figure 16-17 Member Config
The following entries are displayed on this screen:
" Etgcvg"Ogodgt"
Ogodgt"OCE<"
Enter the MAC address of the candidate switch.
276
To Next Page
Loading...
