EasyManua.ls Logo

TP-Link TL-SL5428E - Rear Panel

TP-Link TL-SL5428E
307 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pcog" Uvcvwu" Kpfkecvkqp"
Green
A 100Mbps device is connected to the corresponding
port, but no activity.
On
Yellow
A 10Mbps device is connected to the corresponding
port, but no activity.
Flashing Data is being transmitted or received.
10/100M
Off No device is connected to the corresponding port.
Green
A 1000Mbps device is connected to the corresponding
port, but no activity.
On
Yellow
A 10/100Mbps device is connected to the corresponding
port, but no activity.
Flashing Data is being transmitted or received.
1000M
Off No device is connected to the corresponding port.
40404"Tgct"Rcpgn"
The rear panel of TL-SL5428E features a power socket and a Grounding Terminal (marked
with
).
Figure 2-2 Rear Panel
Itqwpfkpi"Vgtokpcn< TL-SL5428E already comes with Lightning Protection Mechanism. You
can also ground the switch through the PE (Protecting Earth) cable of AC cord or with Ground
Cable. For detail information, please refer to Installation Guide.
CE" Rqygt" Uqemgv< Connect the female connector of the power cord here, and the male
connector to the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage (100-240V~ 50/60Hz 0.6A).
Return to CONTENTS
8

Table of Contents

Other manuals for TP-Link TL-SL5428E

Related product manuals