Wugt"V
{rg<"
Select the type for the User.
Nqecn" Wugt< Indicates that the user is connected to a
local SNMP engine.
Tgoqvg"Wugt<"Indicates that the user is connected to a
remote SNMP engine.
Itqwr"Pcog<"
Select the Group Name of the User. The User is classified to
the corresponding Group according to its Group Name,
Security Model and Security Level.
Ugewtkv{"Oqfgn<"
Select the Security Model for the User.
Ugewtkv{"Ngxgn<"
Select the Security Level for the SNMP v3 User.
Cwvj"Oqfg<"
Select the Authentication Mode for the SNMP v3 User.
Pqpg<"No authentication method is used.
OF7<" The port authentication is performed via
HMAC-MD5 algorithm.
UJC<" The port authentication is performed via SHA
(Secure Hash Algorithm). This authentication mode has
a higher security than MD5 mode.
Cwvj"Rcuuyqtf<"
Enter the password for authentication.
Rtkxce{"Oqfg<"
Select the Privacy Mode for the SNMP v3 User.
Pqpg< No privacy method is used.
FGU<"DES encryption method is used.
Rtkxce{"Rcuuyqtf<"
Enter the Privacy Password.
" Wugt"Vcdng"
Ugngev<"
Select the desired entry to delete the corresponding User. It
is multi-optional.
Wugt"Pcog<"
Displays the name of the User.
Wugt"V{rg<"
Displays the User Type.
Itqwr"Pcog<"
Displays the Group Name of the User.
Ugewtkv{"Oqfgn<"
Displays the Security Model of the User.
Ugewtkv{"Ngxgn<"
Displays the Security Level of the User.
Cwvj"Oqfg<"
Displays the Authentication Mode of the User.
Rtkxce{"Oqfg<"
Displays the Privacy Mode of the User.
Qrgtcvkqp<"
Click the Gfkv button to modify the Group of the User and
click the"Oqfkh{"button to apply.
Pqvg<"
The SNMP User and its Group should have the same Security Model and Security Level.
240
To Next Page
Loading...
